CUSTOM-SIZED PRODUCTS

HOW TO ORDER A RESIZED LCD

Select a model from the list of models show at the left.  You may supply the LCD or TED will supply it and will include it in the quotation.  You may want electronics to interface between the resized LCD and a computer using DMI or VGA formatted signals.  A Controller Kit–to interface the resized LCD with a computer, called “Controller Kit #1400” as defined herein under the Controller Kit #1400 hot button–is available.  If desired, please include this in your Request for Quotation.  The Controller Kit, if ordered with the resized LCD, will be bench tested with your resized LCD before shipment; therefore, the resized LCD will be ready to operate with an input signal from your computer–so-called “plug and play.”

The LCD used to make the resized LCD Model is shown in the table.  If the LCD is no longer manufactured and is at “end of life” it is marked “EOL”.  TED will continue to resized the LCD if it is available.

Send your purchase orders to this email and enter the TED Model numbers in your email inquiry.

IMAGE AREA
W x H, Inch (mm)
GLASS FOOTPRINT
W x H, Inch (mm)
RESOLUTION TED MODEL
Made from Mitsubishi AA 050ME01
2.54 X 2.54 inches
(64.5 x 64.5)
2.87 X 2.97 inches
(72.9 x 75.4)
480 x 480 3ATIP4
3ATI Assembly
Made from Sharp LQ050Y3DC01
2.55 x 2.55
(64.8 x 64.8)
2.91 x 2.88
(73.9 x 73.2)
480 x 480 3ATIP5
Made from NEC NL10276BC13-01
3.28 x 3.28
(83.3 x 83.3)
3.70 x 3.80
(94.0 x 96.5)
640 x 640 4ATIP4
3.90 x 3.90
(99.1 x 99.1)
4.38 x 4.35
(111.1 x 110.5)
768 x 768 3.9 x 3.9P1
Made from Made from NEC NL10276BC16-06D
4.00 X 4.00“
(101.6 x 101.6)
4.47 X 4.53
(113.5 x 115.1)
610 x 610 4 x 4P1
4.20 x 4.20“
(106.7 x 106.7)
4.67 x 4.73
(118.6 x 120.1)
640 x 640 4.2 x 4.2P3
6.00 x 5.04
(152.4 x 127.9)
6.47 x 5.56
(164.3 x 141.2)
915 x 768 5 x 6P2
Made from NEC NL10276BC20-18C
5.00 x 5.00
(127.0 x 127.0)
5.52 x 5.4
(140.2 x 138.9)
618 x 618 5 x 5P6
6.21 x 6.21
(157.8 x 157.8)
6.72 x 6.66
(170.7 x 169.2)
768 x 768 6.2 x 6.2P3
Made from NEC NL10276BC24-21
7.26 x 7.26
(184.4 x 184.4)
7.73 x 7.64
(196.3 x 194.1)
768 x 768 7.2×7.2PI
Made from NEC NL10276BC16-01 EOL
3.25 x 3.15
(82.50 x 80.0)
3.600 x 3.465
(91.40 x 88.0)
495 x 480 3.25X3.15XCB
3.170 x 2.820”
(85.60 x 71.64)
3.550 x 3.200
(90.17 x 81.30)
480 x 412 4ATIP2
4.240 x 4.260
(107.70 x 113.30)
4.640 x 4.640“
(117.80 x 117.80)
647 x 650 4.2X4.2P2
5.035 x 5.035“
(127.90 x 127.90)
5.430 x 5.427”
(137.90 x 137.85)
768 x 768 5X5P4
5.935 x 5.035
(150.75 x 127.90)
6.200 x 5.427
(157.50 x 137.85)
869 x 768 5X6P1
Made from NEC NL10276BC20-08 EOL
6.27 x 6.19 inches
(159.25 x 157.25)
6.72  x 6.64
(170.7 x 168.7)
768 x 768 TED6.25X6.25P6
Made from NEC NL8060BC26-17 EOL
6.762 x 6.245
(171.75 x 158.62)
7.240 x 6.640
(183.90 x 168.65)
650 x 600 6.25X6.25P2
Made from NEC NL1027CBC24-13 EOL
7.265 x 7.27
(184.50 x 184.65)
7.695 x 7.6.35
(195.40 x 193.90)
768 x 768 7.2X7.2P2
Interface electronic cards and cables are needed to operate the resized display from a
computer via DVI or VGA connection.
Controller Kit 1400
© Tannas 2015 February 7, 2015
* Please see notes for further details applicable to all of the resized LCD

RESIZED LCD PRODUCTS BY LICENSEES & TED

TED does limited production, research and development, and licensing of his resizing technology. TED resizes LCD glass for the aerospace & industrial market, and the digital signage market. However, TED only cuts the glass and does not make bezels, backlights, frames, etc., to fit the resized glass. TED Licensees specialize in resizing LCDs with backlights, frames, and ancillary electronics.